ANSI / AMD 100
World Millwork Alliance is a standards-developing organization accredited by the American National Standards Institute (ANSI). In 2009, we developed the AMD 100, a proactive and voluntary performance standard for side-hinged exterior doors (SHEDs).
What is the ANSI/AMD 100 Standard for Side-Hinged Exterior Doors?
- Approved as an American National Standard by ANSI
- Uses the ASTM E330 test method to obtain a full system design pressure rating
- Defines methods for qualifying door system components for substitution in the rated system
- Outlines slab stiffness testing procedures for use in determining component substitution
How Does the ANSI/AMD 100 Benefit My Business?
- It is fair, accurate, and reliable
- It can be used to meet testing and labeling wind load requirements in the International Residential Code (IRC)
- It provides procedures for component qualification and substitution, which makes it cost-effective for door pre-hangers as it limits the amount of testing required
- Get certified to the AMD 100 standard through WMA’s Certification Program
AMD 100 Revisions – (August 3, 2015)
The AMD 100 was developed by WMA to provide door pre-hangers and distributors with a voluntary standard for testing and rating the structural performance of a side-hinged exterior door system, and qualifying components for substitution in that rated system. In May, specific revisions to the standard were proposed by WMA’s Industry Standards and Certification Committee (ISCC) and made available for public review and consensus body balloting. The ISCC has made additional changes in lieu of comments that were received. These changes can be accessed below, and are in strikethrough and underline format. Please note that comments in this recirculation are limited in scope to these additional changes.
Comments are due September 6, 2015 and can be emailed to email@example.com.
As an ANSI accredited Standards Developing Organization (SDO), WMA maintains the standard pursuant to ANSI requirements as reflected in the Procedures for the Development, Revision, Withdrawal, and Discontinuance of WMA Standards. To request a copy of the AMD 100, please email your request to firstname.lastname@example.org.
AMD 100 Technical Interpretations: A Quick Guide
A technical interpretation is defined as a written explanation of the meaning of a specific provision of the standard as determined by either the WMA Interpretations Policy Committee (IPC) or by the WMA Director of Codes and Standards, in response to a written request. The requester shall decide whether to request an ‘official’ or ‘unofficial’ interpretation. See our Quick Guide below.
- Written request sent to email@example.com with the subject line: “Request for Unofficial Interpretation”
- Include requester phone number and email
- Result determined by WMA’s Director of Codes and Standards
- Response time: 10 days
Please note that an interpretation shall not be used to change the content of the standard. Requests that are proposals for changes to the standard will be referred to WMA’s Industry Standards and Certification Committee (ISCC) for consideration in future standard revision cycles.